Jump to main content
🔒 Open 24 Hours, 7 Days a Week☎ (725) 280-5051silverstatelocksmith@yahoo.com
24/7 Emergency Locksmith, Las Vegas, NV

Hook Bolt vs Straight Bolt on a Glass Door in Las Vegas

13/16 of an inch is how far the hook bolt on an Adams Rite sliding door deadlock throws into its strike. The straight bolt in the same lock family throws 1 3/8 inches. The hook is shorter on purpose. It curls behind the strike, so a door that somebody pries or spreads away from its frame still stays locked.

LocksmithListing Certified: Safety Screened, Elite Pro and Top Rated, Las Vegas

Independently verified by LocksmithListing

City of Las Vegas Locksmith License #P64-00012, licensed by Las Vegas Metro Police

Author Source EEAT Authors · Ezra's Author Page

Updated November 2026. The bolt sizes come from the Adams Rite MS1850S product page. The install photos and the clip below are from a job Ezra, one of our two owners, filmed on November 7, 2026, on an aluminum framed glass door.

  • A hook grabs, a straight bolt slidesThe hook curls behind the strike, so prying the door away from the frame does not release it.
  • Hooks were built for sliders and pairsManufacturers and suppliers recommend the hook for sliding doors and for pairs of doors without a center mullion.
  • Match the backset before you buyNarrow stile commercial locks come in 7/8, 31/32, 1 1/8 and 1 1/2 inch backsets, and they are not interchangeable.
  • Test it with the door openOperate the bolt with the key and the thumbturn before closing the door, exactly as Ezra demonstrates in the clip.
  • A keyed main door needs a signThe 2021 building code requires a sign in 1 inch letters when a business locks its main entrance with a key.
Find Your Answer
6 steps

What the Hook Does That a Straight Bolt Cannot

A straight bolt is a steel bar that extends from the door edge into a matching opening in the frame. It performs reliably while the door and frame remain tightly aligned. If an intruder can widen the gap, the bar can eventually slip out of its pocket.

A hook bolt pivots outward and rotates, so its tip finishes behind the strike plate. Adams Rite says the hook shape repels pry bar attempts to spread the door from its jamb or lift it off its track. Holding the door against that kind of attack is the whole reason the hook exists.

The same Adams Rite page lists the straight bolt in its MS1850S lock at 5/8 by 1 3/8 inches with a 1 3/8 inch throw. The hookbolt version is 5/8 by 1 3/8 inches with a 13/16 inch throw. Both bolts are made of eight plies of laminated stainless steel.

The center ply has a ceramic core, which Adams Rite says is there to defeat a hacksaw. So a shorter hook does not mean a weaker bolt, because it simply holds the door in a different way.

Chart of glass door lock numbers, hook bolt throw 13/16 inch, straight bolt throw 1 3/8 inches, lock height 34 to 48 inches, 5 pounds of force, sign letters 1 inch

Where Each Bolt Belongs on an Aluminum Door

Manufacturers and suppliers disagree about swinging doors, and that disagreement matters when you purchase hardware. Adams Rite sells its hookbolt model for a sliding narrow stile aluminum door, and its straight bolt model for a single leaf door.

A National Lock Supply buying guide from April 2026 puts the hookbolt on sliding doors and on pairs of doors with no center post. It says a single swinging door does not need one, and that a straight bolt is faster to fit there.

Avigilon goes further and says hook bolts are not so effective on swinging doors. We think that reads too much into one rule. The hook earns its place wherever the gap at the lock edge could be pried open, and that can include a swinging door on a pair.

The same guide gives a fair warning on the other side. Some older frames have strike pockets too narrow for the hook, so the existing frame decides the choice as much as the door itself does.

Hook bolt or straight bolt on a narrow stile glass door
DoorHook boltStraight bolt
Sliding glass door, aluminumYes, the usual pickRarely
Pair of doors, no center postYesNeeds a different strike setup
Pair of doors with a center postPossibleYes, the usual pick
Single swinging doorPossible if the gap can be priedYes, the usual pick
Older frame with a narrow strike pocketMay not fitYes

A Glass Door Hook Bolt Job, Start to Finish

On November 7, 2026, Ezra filmed a lock job on a swinging aluminum framed glass door. The door opens onto a tiled walkway outside a commercial building, with palm trees nearby.

The door edge is exposed in the clip, and a hook bolt lock case is installed inside the aluminum stile. A thumbturn operates the bolt from inside, and a key cylinder operates it from outside. Lower down, a lever has its own key cylinder just above it, and a latch sits in the door edge.

With the door still open, Ezra turns the key and watches the hook swing out and back, then repeats the test several more times. That simple test identifies a damaged cam or a binding lock case before the door is ever closed against the strike.

Testing with the door open is the inspection step that property owners usually skip. If the hook binds in open air, it will bind even worse against a strike, and a sticking hook on a business entrance usually becomes an expensive lockout.

A hook bolt lock case set into the edge of an aluminum glass door, with the thumbturn beside it
The hook bolt case in the door edge, with the inside thumbturn. Photo by Silver State Locksmith.
Ezra tests the key and the hook throw on a glass door, November 7, 2026. Video by Silver State Locksmith.

Get the Backset and Cylinder Right

Backset is the measurement from the door edge to the center of the key cylinder. A narrow aluminum stile leaves very little room, so a replacement lock with the wrong backset will not align with the existing holes.

Adams Rite builds its MS1850S in 7/8, 31/32, 1 1/8 and 1 1/2 inch backsets. National Lock Supply calls 31/32 inch the older standard and 1 1/8 inches the current default. Measure the original lock, not the door opening, before you order a replacement.

The replacement cylinder has to fit the lock body as well. The Adams Rite page calls for a mortise cylinder 1 inch long and 1 5/32 inches across, with a cam made for that lock. It takes a cylinder on either side or both.

The photograph below shows the key test from the exterior, with the lever and its own cylinder lower on the door. If you change locks, we can key the new cylinders to match the rest of the building through business rekeying.

A hand turns a key in the upper cylinder of an aluminum glass door, with a lever and second cylinder below
Turning the key in the upper cylinder, with the lever below. Photo by Silver State Locksmith.

The Code Rules That Come With a Business Door

A business door has to follow accessibility and building rules that a home door does not. The 2010 ADA Standards say handles, latches and locks must work with one hand, with no tight grasping, pinching or twisting of the wrist.

Section 309.4 caps the force at 5 pounds. Section 404.2.7 sets the height of that hardware at 34 to 48 inches above the floor. A lever handle like the one in this installation is the simplest way to satisfy the operating requirement.

The 2021 International Building Code lets some businesses lock the main door with a key from inside. Groups B, F, M and S qualify, along with Group A spaces of 300 people or fewer. The locking device must be readily distinguishable as locked, so anyone can tell its status at a glance.

A sign must also hang on or beside the door, reading THIS DOOR TO REMAIN UNLOCKED WHEN THIS SPACE IS OCCUPIED, in letters 1 inch high. The building official can revoke that permission for due cause.

Clark County moved to the 2024 edition of the building code on January 11, 2026. Ask the building department how your occupancy is classified before you install a keyed lock on the inside of an exit door.

A locksmith turns a key above the lever of an open aluminum glass door, with the latch showing in the door edge
Key test above the lever, with the latch in the door edge. Photo by Silver State Locksmith.

When to Call a Locksmith for a Glass Door Lock

Call when the hook drags, the key turns but the bolt stays retracted, or the door has to be pushed before it will lock properly. Each of those problems gets worse with time and daily use, and none of them fixes itself.

Call before anyone drills into the door, too. An aluminum stile is thin, and a hole in the wrong location can damage the door for every future lock installation.

Our storefront door lock service covers narrow stile deadlocks, latches and cylinders throughout the Las Vegas valley. If the lock body itself has failed, our commercial door lock repair page explains which problems can be repaired and which components have to be replaced.

Sliding patio doors at home use a different kind of mortise lock, and our sliding glass door lock guide explains how to repair or replace those.

Make Silver State Locksmith a preferred Google source

Loose Ends

What is a hook bolt lock?

A deadlock whose bolt pivots outward and curls behind the strike plate. Adams Rite says the hook repels pry bar attempts to spread the door from its frame or lift it off its track.

Is a hook bolt more secure than a deadbolt?

It resists attack in a different way. A straight bolt can slip out if the gap is pried wide, and a hook stays caught behind the strike. On a tight single door, a straight bolt does the job.

Can you put a hook bolt on a swinging door?

Yes, if the frame has enough clearance for the hook. Suppliers aim it at sliders and at pairs of doors with no center post, and some older strike pockets are too narrow for it.

What backset do glass door locks use?

Narrow stile locks come in 7/8, 31/32, 1 1/8 and 1 1/2 inch backsets. Measure the old lock before you order a new one.

Can a business lock its front door with a key from inside?

Under the 2021 International Building Code, some can, if the lock looks locked and a sign in 1 inch letters says the door stays unlocked while the space is occupied.

Glass door lock giving you trouble? See our storefront door lock service, commercial door lock repair and our commercial locksmith service, or call (725) 280‑5051 any hour. You hear the price before any work starts.

Original Documents

Locked Out? We Can Help, Day or Night

Silver State Locksmith is available 24/7 across the Las Vegas valley. Fast response, transparent pricing, licensed & insured technicians.

Call (725) 280-5051 Now Request Service
☎ Call (725) 280-5051Locked out? We answer 24/7