Best Floor Safe Locksmith In Las Vegas

Silver State Locksmith opens and services floor safes set into concrete slabs in Las Vegas, Henderson and North Las Vegas, day or night. A floor safe cannot come to a shop, so the technician brings the tools to you and usually arrives within 20 to 30 minutes.

Floor safes are a common pick for stores and restaurants that want hidden cash storage, and our commercial locksmith service covers the rest of the building's locks.

Opened in placeThe safe stays set in the concrete slab while the technician works through the lid from above.
Dial serviceGrit and debris that fall into the lock get cleaned out before they wear the parts and cause a lockout.
Proof requiredWe ask for proof of ownership before any floor safe is opened, whether it sits in a home, a store or an office.
Price firstYou get the complete price before work begins, and estimates for businesses are always free.

What Kind of Floor Safe Do You Have?

Floor safes differ in how they are installed in the concrete and in what the lid is designed to stop, which shapes how a technician approaches each one.

In Ground Slab Safe

A steel body is set into a hole in the concrete with only the lid and lock showing at floor level, and dirt, pet hair and spilled liquids drop into the lock from above, so stiff dials and sticky keys are the usual trouble.

Water Resistant Floor Safe

These have a gasket around the lid meant to slow water from mopping, leaks or a flooded room, but the gasket can harden and stick over the years, and if it fails, water may sit inside next to papers.

High Security Floor Safe

A thick lid and a hardened plate guard the lock, and some models carry a UL burglary rating, which makes them slower to open without damage, so careful manipulation of the lock is usually the first approach.

Deposit Floor Safe

Some business floor safes have a slot in the lid so employees can drop cash in without opening the safe, and coins and folded bills can jam the slot, and the lock wears from heavy daily use.

Problems We Fix

The dial feels gritty and hard to turn.We clean and service the lock in place so the dial turns smoothly again and the mechanism is less likely to fail.
I bought a house with a floor safe and nobody has the combination.Once you show proof that the home is yours, we open the safe and set a new combination that only your household knows.
Water got into the recess and now the lock will not work.We dry and test the lock, open the safe if necessary and repair or replace any components that rusted.
The key snapped off in the lid.We extract the broken piece, open the lock and cut a replacement key or install a new lock if the old one is damaged.
Staff are locked out of the store floor safe at closing.A technician comes out at any hour, confirms the owner has approved the opening and opens the safe so the cash can be counted and put away.

How We Handle the Job

1
Check ownership
We confirm the safe and the property are yours with ownership paperwork before any work starts.
2
Clear and inspect
The lid and the area around the lock get cleaned of grit and water so the technician can see exactly what failed.
3
Open the lock gently
Manipulation, working the key lock or a keypad bypass come first, since there is little room to work on a lid at floor level.
4
Repair if drilled
If drilling is the last option, the hole is repaired so the safe locks again before we leave.

What Decides the Price

A floor safe job is priced on the lock, its condition and how hard it is to reach. A dial packed with dirt or a rusted key lock takes more work than a clean one, and a high security lid adds time as well.

Adding a new floor safe means opening the slab, so the scope depends on the room and what runs under the floor, and we go over the job and the price with you before anything is cut. See locksmith rates in Las Vegas for the bigger picture.

Placing a Floor Safe in a Las Vegas Home or Shop

Floor safes suit the concrete slabs under most Las Vegas homes and shops because the slab becomes a thick shell around the safe. Keep them out of laundry rooms and away from water heaters, and choose a spot that sits a little higher than the rest of the room in case the floor ever takes on water.

Summer monsoon storms can push water under garage doors and across low floors, so a garage is a poor place for a floor safe. A closet floor under a rug or a spot under a desk in a back office works well, and a wall safe can hold the small things you reach for every day.

Questions We Get Asked

Can you open a floor safe that has been buried in concrete for years?

Yes, floor safes set in concrete can usually be opened in place without breaking up the slab. The locksmith works the dial or lock from above, just like any other safe, and since old floor safes often have dirt or rust in the lock, cleaning and gentle work come first. Drilling stays a last resort and is repaired afterward.

My floor safe dial is stiff and gritty. Is that a problem?

Yes, a gritty dial is a common floor safe problem because dust and debris fall into the lock from above. Left alone, it can wear the parts and lead to a lockout, so a locksmith can clean and service the lock before it fails. Keeping a mat or cover over the safe helps keep the dial clean.

Does a floor safe keep water out if a pipe bursts?

Not always, so it helps to check the specs. Some floor safes are water resistant and some are not, and ratings vary by model, while water can collect in the recess around the lid. Storing papers and cash in sealed bags inside the safe adds a cheap extra layer of protection against leaks.

Can a floor safe be added to a finished home?

Yes, but it takes more work than a wall safe because the slab must be cut and the safe set in fresh concrete. Placement matters, since you need to avoid plumbing and other lines under the floor, and a locksmith can talk through the job and give you a price before work starts. See our safe services page for more.